Waterproofing Material

• Twice as thick as premium exterior paint - provides crack bridging ability, waterproofing properties & resistance to cracking
• Provides excellent sheen & finish to any building structure
• Flexible - covers hairline cracks (up to 0.5 mm wide) effectively & prevents ingress of water

• Tough & elastic film provides excellent waterproofing
• Provides higher dry film thickness of 1 mm in three-coat application
• Bridges cracks up to 2 mm width

• Tough film build-up provides excellent waterproofing
• Highly elastic film formation which accommodates thermal movements
• Withstand 10 m hydrostatic pressure without any leakages

• Reduces dampness by improving waterproofing of concrete, plaster
• Resists corrosion of steel
• No separation cracks in brick mortar

Water Repellent Coatings (Water Based) E-KOTTN' RCW is a specialized polymer based water repellent coating suitable for waterproofing applications on porous surfaces especially terracotta roof tiles. The micro particles of E-KOITN" RCW penetrates through the voids and seals the pores in applied surface and making it watertight apart from providing a glossy finish.

Prevents growth of fungi, algae, micro-organisms and formation of efflorescence:

• Enhanced water repellent character
• Presents surface damage from water and frost attack
• Easily applicable by brush or spray
• Prevents surface from the attack of salty and acidified atmosphere
• High abrasion resistant
• Resistant to LIV rays & weather Acid resistance
• Clear Coat with Glossy Finish

Coverage:

1 Ltr. will cover 200-250 Sq.R. for 2 coats depending on surface porosity.

Color Option:

Terracotta Red (Against order)

Surface Preparation:

Surfaces to receive E-KGRAT' RCW shall be cleaned thoroughly using blowers, wire brush, water jet, etc. Dry, are on (without loose particles, did and contamination), sound and stable surfaces are required for bonding, performance of the product. Crack should be attended and filled with ECOFILL crack filler.

Mixing Guidelines:

Add minimum 3 part of water with 1 part of E-KOTTAT'RCW and mix until to get homogeneous mixture. Then the mixture can be applied on the prepared surfaces. Can be diluted up to 5 times with water depending on application needs like first coat for highly porous surfaces, etc.

Instruction To Use:

The wiener be brushed manually. Ensure that the surface to receive the coating is absolutely dry and no area has been left out in the first coat. Leave hotter hour to dry and then apply 2nd coot. The prepared mix can also be sprayed with suitable spraying equipments, Do not begin until the spraying people are ready to work.

Packing :

1 Lit, 5 Lit, 20 Lit (Bulk pocking also available against specific orders)

Storage Life :

Shelf life 12 months from the date of manufacturing if store in unopened original packing cold direct sunlight, clear of ground on pallets protected from rain / moisture.

Technical Data: 

Dr. Fixit Roofseal is based on bituminous emulsion, polymer, and additives in water as a medium. It is ahighly viscous dark brown coloured paste used for waterproofing of above ground & below ground concretestructures. After drying it forms a thick film, which bonds strongly to cementitious surfaces, forms jointless orseamless weatherproof membrane.

• 100 to 150 Sq.Ft/Litre (for 2 coats).
• Coverage may vary depending upon the texture and porosity of surface

Surface Preparation:

All surface must be absolutely sound and thoroughly cleaned to  remove dust, dirt, loose particles, oil, grease, corrosion, efflorescence, bond-breakers, mile, etc. all the cracks shall be filled by crack fillers like ECOFILL before application. Existing metal roofs should be thoroughly cleaned with emerge paper and ensured free from rust. A rust preventive primer coat of RUSTAWAY 3 in ! should be applied and allow it to dry for 1 hour to ensure high adhesion of HEATAWAY to the surface.

Application Guideline:

Mix HEATAWAY with clean water in 1:1 ratio. Apply two coats of the mix evenly by brush, roller or airless spray with an interval of 3 hours between coats. For demanding applications, use higher concentration of HEATAWAY in final coat.

Shelf Life:

12 Months from the date of manufacturing when stored in Cool and Dry place in original unopened container.

Packing:

1 Kg & 5 Kg

Safety:

Use of dust mask, safety goggles & gloves are recommended.

We are engaged in distributing Sunanda Specialty Coatings to the clients. These are widely demanded by various building contractors and developers for having guaranteed success in their projects and endeavors.

Following are some of the features of our products:

• User-friendly products
• Accurately composed
• Eco-friendly
• We provide technical guidance and after sales support